Mastering Assessment Validation: How to Validate Assessments

Mastering Assessment Validation: How to Validate Assessments

Blog Article

RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.

Though we've written extensively on validation, let's clarify it again. ASQA describes it as a quality assessment review.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.

The standards mandate two types of validation.

The initial assessment validation ensures your RTO's assessments comply with the training package requirements.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.

The Basics of the Two Types of Assessment Validation

Exploring the Concept of Assessment Validation

As discussed earlier and in our prior blogs, validation involves two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.

Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

Guidelines for Conducting Assessment Tool Validation

With a clear understanding of the two types of validation, let’s focus on assessment tool validation.

When is Assessment Tool Validation Conducted?

Assessment tool validation aims to verify that all elements, performance criteria, and performance and knowledge evidence are covered by your assessment tools.

Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.

You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.

Yet, this is not the only occasion to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated
- add new training products on scope
- training product updates are reviewed against your course
- learning resources are identified as a risk during your risk assessment

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

What Training Products Need Validation?

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Resources Required for Assessment Tool Validation

Study Resources

Since you are conducting assessment tool validation, you will need the entire suite of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – these could be checklists, registers, and templates created separately from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.

Assessment Validation Team

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

Together, your validation panel should possess:

Up-to-date vocational competencies and industry skills pertinent to the unit being validated

Up-to-date expertise and skills in vocational teaching and learning

Any one of these training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or the successor version

Validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

While ASQA does not recommend or require a specific template for assessment tool validation, numerous templates are available online. These tools generally require validators to examine the tools as a whole to see if they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?

As noted in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Assessment Core Principles
Fairness – Is the assessment process equitable and accessible to everyone?

Flexibility – Does the assessment provide different options to demonstrate competence according to individual needs and preferences?

Validity – Is the assessment measuring what it is supposed to measure? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment give consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Core Rules of Evidence

Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to confirm the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Are the assessment tools in line with current units of competency and contemporary industry practices?

Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.

To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:

Practice Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

nappy changing

prepare bottles, feed infants from bottles, and clean equipment

prepare solids and feed babies

respond suitably to baby signs and cues

prepare and settle infants for sleep

monitor and promote physical exploration and gross motor skills suitable for the age

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least click here once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby won’t suffice.

All Requirements or Not Competent

Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Be Clearer

Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What details can be included in a work package?

Answers can include:

Necessary materials

Appropriate costs

Time allocated for activities

Allocated duties and responsibilities

If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.

This applies equally to assessment items with double-barrelled questions or questions that require more than one answer at the same time. These can confuse students and assessors, as illustrated in the example below:

Name a hazard and/or environmental concern in the workplace and choose the most effective hazard control hierarchy.

Possible answers can include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, engineering controls, administrative controls

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolation, use of engineering controls, administration

Equipment or machinery – isolating, engineering controls, administration

Steering clear of double-barrelled questions makes it simpler for students to respond and for assessors to judge competence accurately.

Seeing these requirements, you might think, “Don’t learning resource developers offer audit guarantees?” But such guarantees mean you must wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s wiser to take the safe and compliant route.